How to get the Truck v965(!) map onto a 2GB device   

How to get the Truck v965(!) map onto a 2GB device

Postby navitdavid » Sat Apr 09, 2016 12:49 pm

Hi All,

the original tread about this has been closed, so I had to open this to ask questions. In the original topic the tutorial can not be completed due to the files from the v965 maps are too big. Could be okay with the v945(it was tested).
Also files are missing,and can not be copied from the smaller map to the new "working folder"

1. If not done unpack the downloaded maps into corresponding folders on your hard drive.
2. Create another folder to store the smaller Truck map in.
(of course you could just extract what you need, but simply copy and delete is easier for most users)
3. Copy all files from the original Truck map into the new folder - your working folder from now on.
4. in the working folder delete all cspeech files as well as the following files:
crpoi.dat
poi.dat
cphoneme.dat The remainings are 2.1 GB, so it's doesn't fit to a 2 GB card
5. from your single country map copy the following filesinto the working folder:
borders.dat Not present in v965 UK_ROI
citymap.dat Not present in v965 UK_ROI
citymap.met Not present in v965 UK_ROI
faces.dat
faces.met Not present in v965 UK_ROI
Confirm to overwrite existing files!


Any ideas? Thank you
navitdavid offline


Junior Member



 
Joined: Mon Mar 21, 2016 10:16 pm
Posts: 32
Has thanked: 8 times
Been thanked: 1 time

Re: How to get the Truck v965(!) map onto a 2GB device

Postby holyhead » Sat Apr 09, 2016 1:33 pm

That is no longer possible. You have to buy one with 4GB internal or with SD slot.
holyhead offline


V.I.P Member



 
Joined: Tue Jan 26, 2010 11:30 am
Posts: 2082
Has thanked: 50 times
Been thanked: 490 times

Re: How to get the Truck v965(!) map onto a 2GB device

Postby navitdavid » Sat Apr 09, 2016 1:42 pm

I have a GO 300 with SD card slot. I've tried 4 GB cards (Kingston,Sandisk) non of them are working, because I've updated the Bootloader to v5.5297
It doesn't work with 4 GB cards. I should downgrade it to v5.5022
I'm just afraid of causing any damage during try it make to 5.5022
navitdavid offline


Junior Member



 
Joined: Mon Mar 21, 2016 10:16 pm
Posts: 32
Has thanked: 8 times
Been thanked: 1 time

Re: How to get the Truck v965(!) map onto a 2GB device

Postby holyhead » Sat Apr 09, 2016 2:01 pm

I don,t believe that the bootloader is the reason. I told you before on a One v1 with bootloader 5.5297 the truck navcore is working.
holyhead offline


V.I.P Member



 
Joined: Tue Jan 26, 2010 11:30 am
Posts: 2082
Has thanked: 50 times
Been thanked: 490 times

Re: How to get the Truck v965(!) map onto a 2GB device

Postby navitdavid » Sat Apr 09, 2016 2:13 pm

holyhead wrote:I don,t believe that the bootloader is the reason. I told you before on a One v1 with bootloader 5.5297 the truck navcore is working.


I remember, but your One v1 could be different, my GO 300 is much older.Your one is working,my one doesn't . Also saw other topic saying that, for old models like Go 300,500,700 is the best to use v5.5022
But it was too late I've already updated the Bootloader, and this can not be downgraded. Because there is no Bootloader for downgrading. Or maybe there is something for it?
navitdavid offline


Junior Member



 
Joined: Mon Mar 21, 2016 10:16 pm
Posts: 32
Has thanked: 8 times
Been thanked: 1 time

Re: How to get the Truck v965(!) map onto a 2GB device

Postby holyhead » Sat Apr 09, 2016 2:30 pm

The information is from 2010. In the meantime, there have been newer bootloaders.
You can downgrade to bootloader V0.0001 and after that upgrade it to 5.5022. And it is of your own risks.
So no complaining if something goes wrong.

The Go 300 is from April 2005
THe One V1 is from Oktober 2005
Last edited by holyhead on Sat Apr 09, 2016 3:18 pm, edited 1 time in total.
holyhead offline


V.I.P Member



 
Joined: Tue Jan 26, 2010 11:30 am
Posts: 2082
Has thanked: 50 times
Been thanked: 490 times

Re: How to get the Truck v965(!) map onto a 2GB device

Postby navitdavid » Sat Apr 09, 2016 3:05 pm

holyhead wrote:(...)You can downgrade to bootloader V0.0001 and after that upgrade it to 5.5022. And it is of your own risks.
So no complaining if something goes wrong.


IT'S WORKING! I'VE MADE IT!!!! I'VE TURNED MY 10 GBP EBAY SAT NAV TO A 320 GBP TRUCK SATNAV!

THANK YOU ALL!!!! I'M SO HAPPY!!!

If you have an old GO 300,500, or 700 how to do it to handle 4 GB cards:
Use you 2 GB,or less card: downgrade it to 0.0001 than 5.5022.
Do NOT forgot to remove the 5.5527 Bootloader from your 4 GB memory card after you done the down-and-upgrade using the old 2 GB card, or less card!
navitdavid offline


Junior Member



 
Joined: Mon Mar 21, 2016 10:16 pm
Posts: 32
Has thanked: 8 times
Been thanked: 1 time

Re: How to get the Truck v965(!) map onto a 2GB device

Postby holyhead » Sat Apr 09, 2016 4:06 pm

Nice

If you have an old 300,500,(700 not has Hard Disk) then you can directly update the bootloader to 5.5022.
You don,t have to downgrade that was only in this case, because the bootloader was higher than 5.5022 i.e. 5.5279.
And I still believe that the bootloader has nothing to do with it.
You can only find that out to upgrade from 5.5022 to 5.5279
But I suppose you do not try it out
holyhead offline


V.I.P Member



 
Joined: Tue Jan 26, 2010 11:30 am
Posts: 2082
Has thanked: 50 times
Been thanked: 490 times

Re: How to get the Truck v965(!) map onto a 2GB device

Postby tendriver » Sat Apr 09, 2016 10:40 pm

Re: Which tomtom is required for EU truck navcore and map?
navitdavid wrote:I have a GO 300 with SD card slot. I've tried 4 GB cards (Kingston,Sandisk) non of them are working, because I've updated the Bootloader to v5.5297It doesn't work with 4 GB cards


Re: How to get the Truck v965(!) map onto a 2GB device
navitdavid wrote:I have a GO 300 with SD card slot. I've tried 4 GB cards (Kingston,Sandisk) non of them are working, because I've updated the Bootloader to v5.5297It doesn't work with 4 GB cards.

Did you remember to RE-PATCH THE MAP EVERYTIME YOU MOVED IT FROM THE 300 TO THE 730 & BACK TO THE 300??
I do not give help by PM. It deprives our other members of a chance to learn. Please post your issue in the appropriate forum/thread. You will get an answer.
tendriver offline


User avatar Ex Super Mod



 
Joined: Thu May 20, 2010 4:43 pm
Posts: 12005
Has thanked: 339 times
Been thanked: 627 times

Re: How to get the Truck v965(!) map onto a 2GB device

Postby navitdavid » Sun Apr 10, 2016 8:52 am

tendriver wrote:Did you remember to RE-PATCH THE MAP EVERYTIME YOU MOVED IT FROM THE 300 TO THE 730 & BACK TO THE 300??


Hi,

no, I bought 2 cards at the same time.
navitdavid offline


Junior Member



 
Joined: Mon Mar 21, 2016 10:16 pm
Posts: 32
Has thanked: 8 times
Been thanked: 1 time

Re: How to get the Truck v965(!) map onto a 2GB device

Postby navitdavid » Sun Apr 10, 2016 9:14 am

holyhead wrote:(...)You don,t have to downgrade(...)

If you buy a GO 300 with a new 5.5279 on it, it won't work.Others could have been in the same trouble,and you could buy one from Ebay.The seller couldn't manage to figure it out why it's not working,after he upgraded it to 5.5279,and he put it up for sale. In this case you gotta downgrade it.


holyhead wrote:(...)You can only find that out to upgrade from 5.5022 to 5.5279(...)

This already happened.(by mistake) Let me tell you what happened : I put the 0.0001 onto the 2 GB card. Downgrade done. That I put the 5.5022 onto the 2 GB card. Done.Than, I put the 4 GB card back into it, but I forgot the 5.5279 on it.So when it booted up(because this time still running on the 5.5022 it recognized the 4 GB card,and the 5.5279 bootloader on it) So, it's upgraded itself to 5.5279 again, and than the 4 GB stopped working again. Started the process again: 2GB card - 0.0001 than 5.5022
At this time, I deleted the 5.5279 from the 4 GB card.Than I put the 5.5022 on it.(to preventing the upgrade to 5.5279)
Now it WORKS!
This clearly shows that, the 5.5279 is not suitable for G0 300 models.
navitdavid offline


Junior Member



 
Joined: Mon Mar 21, 2016 10:16 pm
Posts: 32
Has thanked: 8 times
Been thanked: 1 time

Re: How to get the Truck v965(!) map onto a 2GB device

Postby tendriver » Tue Apr 12, 2016 1:10 pm

navitdavid wrote:1. At this time, I deleted the 5.5279 from the 4 GB card.
2. Then I put the 5.5022 on it.(to preventing the upgrade to 5.5279)
3. Now it WORKS!

1. Smart idea.
2. This was not necessary. A B/L file only runs on the first boot-up after it is loaded on a device. It is dormant on that device from that point on. If a user is happy with the installed B/L, a B/L file is not even needed, unless the user wishes to do another B/L up-date.
3. Thanx for the update.
I do not give help by PM. It deprives our other members of a chance to learn. Please post your issue in the appropriate forum/thread. You will get an answer.
tendriver offline


User avatar Ex Super Mod



 
Joined: Thu May 20, 2010 4:43 pm
Posts: 12005
Has thanked: 339 times
Been thanked: 627 times


Return to Tutorials

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 4 guests