Rider3 app on non_Rider and old Rider devices

Maybe someone who don't has a Rider or has an old Rider wants to try the NC 9.205 (Urban Rider; Birthday= 05 July 2010) to use the features of the new Urban Rider.

I have an One 2nd edition (32MB RAM).

I can use use this original NC, but
- available RAM shrinks to ~0MB.
- the GUI looks oldfashioned and not like a Rider.

Thanks to DSA it is possible to run this NC with 32MB RAM (~ 8 MB available) as Urban Rider on any device.


This is a copy of my sdcard:
[Please Register or Login to download file]

*****************************************
NEW:
[SIZE="3"]Urban Rider Special (with MP3 player)[/size]
I tried to mixture my latest configuration with some files from DMs "NC9 ME v2.0.0-pre3".

This is the result:
[Please Register or Login to download file]

Note: You NEED a BT-headset with "Headset, Handsfree and A2DP" capabilities !!!

configuration steps:
- prepare headset to be ready for new connection
- connect (pair) through headset-configuration
- prepare headset to be ready for new connection AGAIN
- connect (pair) through new loudspeaker-settings -> bluetooth (this is the "special")

hints (special edition):
- Each switch on first test voice before playing music
- don't walk out of reach of your bluetooth connection while playing music
- don't copy too much mp3 files onto your sdcard
- special edition does not work on widescreen devices (icons broken)

*****************************************

hints (both):
- use small maps (only one country)
- no need for ASR/Cspeech enabled maps


[SIZE="3"]Feedback would be appreciated..[/size]


additional infos:

TTS is enabled in this configuration, but the files are not included in my backup. You definitely need 64 MB of RAM to use LoquendoTTS v7. In mode "rider" TTS only works on "Rider Special".

If you want to change the mode you have to modify the file "reskin" with a Linux compatible editor (like Notepad++ or UltraEdit for example). Dont use Notepad or Wordpad (CR/LF -> LF problem). These values are supported: x20, x30, x40, x50, rider
You can also just copy one of the attached configuration files to the root of your sdcard if you dont have such an editor.

In Rider-mode you need a bluetooth-headset.
It is expected to work on One 1st, One 2nd, XL 1st, any Go, any Rider.
On TT-devices without bluetooth this would be useless or you forgo sound.

Modes x20/30/40/50 should work on all devices.
Old Rider Cardos are different to those headsets which you can connect through loudspeaker-settings -> bluetooth hifi-device.
Headsets that can be connected this way support "A2DP" (Advanced Audio Distribution Profile). This profile supports hifi quality in stereo.

Old original Rider-headsets support "Headset" and "Handsfree" profiles which are not compatible. They only support mono low quality sound, but have the advantage to remote control your mobile phone. As a result the cpu-load will be lower.

I do use a "JABRA BT320s Bluetooth-Headset" which supports Headset, Handsfree, A2DP and AVRCPPrfile, but many other will work too.

Please read the [Please Register or Login to download file]

Pls. don't ask questions through PM. Do use this forum!


Other absorbing postings of bmwdriver:

History-of-NavCores
Rider3-app-on-non_Rider-and-old-Rider-devices = NC 9.205
latest-NC-prepared-for-small-and-large-devices = NC 9.058, NC 9.061, NC 9.151, NC 9.160, NC 9.205
Best-NavCore-for-Go-x10-Go-x20-and-Go-x30 = NC 9.051
How-to-get-maximum-available-RAM-on-small-devices = NC 8.545

Hi all,

i have purchased a tomtom one v2 and would like to convert it to a rider.

the links here are dead.

can anyone please send me new links ?

thanks

kippers_cracks wrote:the links here are dead. can anyone please send me new links ?

You may want to look at these instead:

Navcore 9.500 with Rider5 skin

Rider Navcore 9.500

Please I need some patch for old Tomtom Rider.

tomddd wrote:Please I need some patch for old Tomtom Rider.

See Universal Navcore Installer post 272.