Re: WNRO GL1 Clock Error/Sat Fixes Workaround
Sun Jun 02, 2019 4:47 pm
Re: WNRO GL1 Clock Error/Sat Fixes Workaround
Sun Jun 02, 2019 5:46 pm
Dear Treysis
Previously congratulate you for your work.
Obtained 9,541.2-2042-CAB-navcore-LE.cab original of the company
Generated DSA with emulation x50 = 37, added extras etc etc
Obtained your pack ttconv-v9.zip 60 kv, uncompressed and copied in the root
In a ONE V4 Serial Z3 with 5.5128 bootloader, works perfectly, it has been a spectacular thing
With the same modus operandi applied to a ONE XL V9 Serial RB the question is that when connecting with the satelites and synchronize the time this is no longer 00:00 with the configuration 24 h specifically at 19:36 real time on the device listed at 19:06.
After reading the notes again I have reset the gps with the menu button ttconv and it has been working perfectly
Regards
Previously congratulate you for your work.
Obtained 9,541.2-2042-CAB-navcore-LE.cab original of the company
Generated DSA with emulation x50 = 37, added extras etc etc
Obtained your pack ttconv-v9.zip 60 kv, uncompressed and copied in the root
In a ONE V4 Serial Z3 with 5.5128 bootloader, works perfectly, it has been a spectacular thing
With the same modus operandi applied to a ONE XL V9 Serial RB the question is that when connecting with the satelites and synchronize the time this is no longer 00:00 with the configuration 24 h specifically at 19:36 real time on the device listed at 19:06.
After reading the notes again I have reset the gps with the menu button ttconv and it has been working perfectly
Regards
Last edited by obery on Tue Jun 04, 2019 3:24 pm, edited 2 times in total.
Re: WNRO GL1 Clock Error/Sat Fixes Workaround
Sun Jun 02, 2019 7:22 pm
I've tried this on a One XL (widescreen) and a One v3 (both GL1 chipsets).
Running 9.500 navcore with the updated GLGPS bin file from 9.541 (but nothing else, no GPSQuickFix).
Both work like I was used to, before April. Fast satellite fix, 00:00 issue not there.
The only thing that is not really clear is how to use it.
I've clicked "ttconv" in the menu.
Then I've clicked NoMiniLog in the menu.
Then the device restarted and everything worked. Is that the correct procedure ?
Running 9.500 navcore with the updated GLGPS bin file from 9.541 (but nothing else, no GPSQuickFix).
Both work like I was used to, before April. Fast satellite fix, 00:00 issue not there.
The only thing that is not really clear is how to use it.
I've clicked "ttconv" in the menu.
Then I've clicked NoMiniLog in the menu.
Then the device restarted and everything worked. Is that the correct procedure ?
Re: WNRO GL1 Clock Error/Sat Fixes Workaround
Sun Jun 02, 2019 9:02 pm
firefoxie wrote:I've clicked "ttconv" in the menu.
Then I've clicked NoMiniLog in the menu.
Then the device restarted and everything worked. Is that the correct procedure ?
This is indeed the correct procedure described by treysis in the file "README-ttconv.txt" (see below). I think that the "TTconv" icon is only used to restart the conversion of the time in case of problem.
Extract of the file "README-ttconv.txt":
«Installation?
Just unpack the archive to the main directory of the TomTom. It will then
start automatically. In version v7 I added two menu options: "MiniLog Yes"
and "MiniLog No". If you are a user of Joghurt's tool "MiniLog" or "Height",
you should select "Yes", which will activate it. Otherwise select "No".
The device will then reboot and both menu icons are deleted automatically.»
Re: WNRO GL1 Clock Error/Sat Fixes Workaround
Wed Jun 05, 2019 9:04 pm
tt one 3 edition (v6) with 9.541 SE for One XL (WNRO OK)... work fine 
Re: WNRO GL1 Clock Error/Sat Fixes Workaround
Fri Jun 07, 2019 7:33 pm
Post #1 updated to version 10.0
Changelog ttconv v10 (07-06-2019):
-rewrite of parsing NMEA sentences to be more universal and remove some mistakes while parsing certain sentences, optimization of memory usage
-fully automatic startup, no configuration for MiniLog neccessary anymore
-removed delays from scripts for faster startup time
-updated readme
Changelog ttconv v10 (07-06-2019):
-rewrite of parsing NMEA sentences to be more universal and remove some mistakes while parsing certain sentences, optimization of memory usage
-fully automatic startup, no configuration for MiniLog neccessary anymore
-removed delays from scripts for faster startup time
-updated readme
Re: WNRO GL1 Clock Error/Sat Fixes Workaround
Mon Jun 10, 2019 7:56 pm
Re: WNRO GL1 Clock Error/Sat Fixes Workaround
Mon Jun 10, 2019 8:22 pm
Jorre2220 wrote:Can we update your navcore with ttconv v10 ?
Of course. Just add the contents of the ttconv-v10.zip archive.
Re: WNRO GL1 Clock Error/Sat Fixes Workaround
Mon Jun 10, 2019 9:17 pm
Hi all. I have a tomtom one v8 with the GL1 antenna, with the navcore 9541 and the map 1030.9524. From April 6 I have the problem of the hour that stays at 00:00 and problems with the reception of the satellites.
Given this, my question is that if with the ttconv-v10, the problem of the time and reception of the satellites would be solved?
Another thing how to install and where the ttconv-v10 file is installed?
I hope your answer
Warm regards to all
Given this, my question is that if with the ttconv-v10, the problem of the time and reception of the satellites would be solved?
Another thing how to install and where the ttconv-v10 file is installed?
I hope your answer
Warm regards to all
Re: WNRO GL1 Clock Error/Sat Fixes Workaround
Mon Jun 10, 2019 9:34 pm
@rafitajerez
Simply read the "README-ttconv.txt" file provided with the "ttconv-v10.zip" archive.
Simply read the "README-ttconv.txt" file provided with the "ttconv-v10.zip" archive.
Re: WNRO GL1 Clock Error/Sat Fixes Workaround
Tue Jun 11, 2019 6:00 am
My tomtom one v8 is with 32 RAM so I need ttconv-v9, where it is?
Re: WNRO GL1 Clock Error/Sat Fixes Workaround
Tue Jun 11, 2019 7:55 am
Re: WNRO GL1 Clock Error/Sat Fixes Workaround
Tue Jun 11, 2019 11:52 am
Post #1 updated to version 11.0
Changelog ttconv v11 (08-06-2019):
-minor code optimizations to ttconv
-added version information to ttconv
Changelog ttconv v11 (08-06-2019):
-minor code optimizations to ttconv
-added version information to ttconv
Re: WNRO GL1 Clock Error/Sat Fixes Workaround
Tue Jun 11, 2019 1:50 pm
Yes... it work´s Tomtom One (V6) with editions of NavCore 9.541,on my device with only 32 MB RAM!
Re: WNRO GL1 Clock Error/Sat Fixes Workaround
Tue Jun 11, 2019 2:42 pm
hi guys, i'm sorry if im misunderstanding, but im trying tobring a one xl to life, but its impossible.
i did the files in the root/main of the tomtom, but still doesnt get sattelites.
i'm using navcore 9541.
should it help if i use a older navcore, if so yes wich one?
sorry if i misread something, english is not my native language.
ohja, the tomtom one xl is 32 but GL1
Shy
i did the files in the root/main of the tomtom, but still doesnt get sattelites.
i'm using navcore 9541.
should it help if i use a older navcore, if so yes wich one?
sorry if i misread something, english is not my native language.
ohja, the tomtom one xl is 32 but GL1
Shy