Re: WNRO Ultimate Solution for Go x10/x20/x30 & 7000
Mon Sep 28, 2020 5:51 pm
works great on ll mine, thank you.
Re: WNRO Ultimate Solution for Go x10/x20/x30 & 7000
Thu Dec 17, 2020 5:40 pm
Hello,
A perfect solution to the WNRO syndrom on Go730 and Rider 2nd edition.
No Quickfix needed every week anymore. Great.
Good job guys !
A perfect solution to the WNRO syndrom on Go730 and Rider 2nd edition.
No Quickfix needed every week anymore. Great.
Good job guys !
Re: WNRO Ultimate Solution for Go x10/x20/x30 & 7000
Sat Jan 09, 2021 11:18 am
I there
I have a tomtom go 930 and I have updated the navcore to 9541.the device has the GPS type SIRF 3 FFFF.
This means I should update the firmware because the GPS type or because the navcore is already 9541,it's fine?
I have a tomtom go 930 and I have updated the navcore to 9541.the device has the GPS type SIRF 3 FFFF.
This means I should update the firmware because the GPS type or because the navcore is already 9541,it's fine?
Re: WNRO Ultimate Solution for Go x10/x20/x30 & 7000
Sun Feb 07, 2021 4:12 pm
holyhead wrote:mrlongest wrote:Apologies for this late response - family got in the way! Followed your advice for my ONE XL and
• Initially after a few minutes it found around 5 satellites but took another 5 minutes or so to fix 3 of them.
• Then after more time (hours – left on over lunch) many (>5 <9) satellites now fixed. Good result eventually.
• On startup, even with updated QuickGPSfix, took just over 3 minutes to find and fix 6 satellites. But that’s acceptable.
• Couldn’t locate the menu display showing battery charge state.
The inability to find any menu entry to see the battery charge state is annoying to say the least. Can another 'skin' be applied to make this available? If so how do I do that?
Also I'd like to have the auto-start function available. The following references are seen on the German Digital Eliteboard for the ONE XL 32mb model. "Auto-start NC 9.510", "TT Navcore 9.541_ WNRO-Fix_32MB-Ram auto-an" and "NC 9.541_ WNRO-Fix_32MB-Ram mit auto-an-Funktion". But I've been unsuccessful in locating the download source for any of those NCs on that Eliteboard forums or anywhere else. Can somebody body help me with that please?
Many thanks
PS Would this post be better placed in a more appropriate sub-forum? Please advise/arrange.
Give it a try I don,t know if it works
[Please Register or Login to download file]
@mrlongest any update? Did this work? I’d like auto-on for my go 920 because it’s usually locked inside a waterproof box on my motorbike.
@holyhead link not working, can you update please?
Re: WNRO Ultimate Solution for Go x10/x20/x30 & 7000
Mon Feb 08, 2021 12:04 pm
Hi BartmanEH, the WNRO Ultimate Solution with auto-on was applied to both of my GO 920s and still works most successfully on both.
However, the same cannot be said for my ONE XL...holyhead's link [Please Register or Login to download file] led to a NC “6a.Navcore 9.541_TTS_ GL1_GL2_Rider 2013-Fix auto-start_32MB ram”. It worked but it is rather delicate: the addition of another voice for example can lead to a screen-freeze. And that NC doesn't allow TMC operation. It is also slower to obtain a full GPS fix when travelling. All in all, I lost interest in resurrecting my ONE XL!
But go ahead with upgrading your GO 920. It's very worthwhile!
However, the same cannot be said for my ONE XL...holyhead's link [Please Register or Login to download file] led to a NC “6a.Navcore 9.541_TTS_ GL1_GL2_Rider 2013-Fix auto-start_32MB ram”. It worked but it is rather delicate: the addition of another voice for example can lead to a screen-freeze. And that NC doesn't allow TMC operation. It is also slower to obtain a full GPS fix when travelling. All in all, I lost interest in resurrecting my ONE XL!
But go ahead with upgrading your GO 920. It's very worthwhile!
Re: WNRO Ultimate Solution for Go x10/x20/x30 & 7000
Mon Feb 08, 2021 3:03 pm
mrlongest wrote:[...]the WNRO Ultimate Solution with auto-on was applied to both of my GO 920s and still works most successfully on both.[...]But go ahead with upgrading your GO 920. It's very worthwhile!
I'm confused: I don't see an auto-on navcore for Go 920 in this thread (or anywhere). How did you get auto-on working on your Go920? I don't want to load any crippled 32MB navcores in my Go920.
Re: WNRO Ultimate Solution for Go x10/x20/x30 & 7000
Tue Feb 09, 2021 11:07 am
Hi BartmanEH, I suggest you study the Navitotal thread "Navcore 9.510 with auto-power-on" - the posts by ferrie were most useful. I also referred to the German forum Digital Eliteboard - their post "https://www.digital-eliteboard.com/threads/downloads-dsa-9-0xx-navcores-fur-9-0xx-fur-32-mb-ram-navis.213902" was the most useful. (Google translation will assist if you've no German).
What I ended up with is the auto-start navcore "9.510.1234792.1 (s3c24xx)OS 842337 (2039. 4/4/2013)" on both of my GO 920s.
How I got there was rather convoluted. Overcoming the WNRO problem didn't help. But having two GO 920s to 'play with' was a great help.
However, I'd be prepared to share my GO 920 backup folder with you if I knew of an easy way to do that.
Best of luck!
What I ended up with is the auto-start navcore "9.510.1234792.1 (s3c24xx)OS 842337 (2039. 4/4/2013)" on both of my GO 920s.
How I got there was rather convoluted. Overcoming the WNRO problem didn't help. But having two GO 920s to 'play with' was a great help.
However, I'd be prepared to share my GO 920 backup folder with you if I knew of an easy way to do that.
Best of luck!
Re: WNRO Ultimate Solution for Go x10/x20/x30 & 7000
Tue Feb 09, 2021 2:10 pm
Thanks for your help, mrlongest. I found the thread Navcore 9.510 with auto-power-on and it was quite enlightening notwithstanding the tangents.
Lastly, I don't see definitive information answering your question about suicide.dat. Does auto power on work from both standby mode and full shutdown mode? If suicide.dat file is missing entirely, does that cause device to fully power down and skip standby mode?
But surely it did? You reported that gps fix was taking too long but subsequently fredderf pointed to the WNRO thread about updating the GPS firmware to v3.2.5/v3.6.0 which fixes the gps fix time, right?mrlongest wrote:Overcoming the WNRO problem didn't help.
I'll PM you a google drive link if I need it, thanks. One problem I have is that I'm on a Mac and it looks like the navcore installer is a Windowz .exemrlongest wrote:I'd be prepared to share my GO 920 backup folder with you if I knew of an easy way to do that.
Lastly, I don't see definitive information answering your question about suicide.dat. Does auto power on work from both standby mode and full shutdown mode? If suicide.dat file is missing entirely, does that cause device to fully power down and skip standby mode?
Re: WNRO Ultimate Solution for Go x10/x20/x30 & 7000
Tue Feb 09, 2021 11:15 pm
Hi BartmanEH, "overcoming the WNRO problem didn't help..." was referring to it making the resolution of the NC auto-start problem more convoluted. Not that the WNRO firmware upgrade solution didn't help solve the GPS fix problem: it manifestly did.
The suicide.dat file forces the TT to shutdown fully after its selected time expires. Without that file the TT stays in standby mode which significantly depletes the battery. I experimented with those times and compromised eventually at a setting of 90 minutes. That matches my general usage - stopping for a break during a journey, and then allowing the TT battery enough time to recharge sufficiently during the following leg of the journey. And auto-start doesn't work from a full shutdown condition.
I've no experience with using a Mac and can't help you there.
Hasty reply - hope it helps..!
The suicide.dat file forces the TT to shutdown fully after its selected time expires. Without that file the TT stays in standby mode which significantly depletes the battery. I experimented with those times and compromised eventually at a setting of 90 minutes. That matches my general usage - stopping for a break during a journey, and then allowing the TT battery enough time to recharge sufficiently during the following leg of the journey. And auto-start doesn't work from a full shutdown condition.
I've no experience with using a Mac and can't help you there.
Hasty reply - hope it helps..!
Re: WNRO Ultimate Solution for Go x10/x20/x30 & 7000
Wed Feb 10, 2021 11:38 am
Re: WNRO Ultimate Solution for Go x10/x20/x30 & 7000
Wed Feb 10, 2021 4:14 pm
Does this NC suit both the GO x10...family and the ONE XL TTs?
Re: WNRO Ultimate Solution for Go x10/x20/x30 & 7000
Sat Feb 13, 2021 8:12 pm
mrlongest wrote:Does this NC suit both the GO x10...family and the ONE XL TTs?
Yes
Re: WNRO Ultimate Solution for Go x10/x20/x30 & 7000
Mon Feb 22, 2021 8:09 pm
morris8cars wrote:[...]you can go back if it fails but how do I do this if so. can you explain as dont want to break TT.
ttgo.bif states GPSFirmwareVersion=GSW3.2.4TT_3.1.00.12-C35B1.02
I have the same GPS version reported in ttgo.bif of my GO920. I too would like to be able to go back to this version if 3.6.0 doesn't work out well. Did you figure out how to be able to go back @morris8cars?
Re: WNRO Ultimate Solution for Go x10/x20/x30 & 7000
Tue Jun 22, 2021 2:18 pm
Great!
Thanks, version 3.6.0 repaired all my 3 unusable
tomtom ONE V1 (4N00.001)
Still going strong, about 16 years after production, with the newest maps!
(navcore 8.412SE, bootloader 5.5128)
Thanks, version 3.6.0 repaired all my 3 unusable
tomtom ONE V1 (4N00.001)
Still going strong, about 16 years after production, with the newest maps!
(navcore 8.412SE, bootloader 5.5128)
Re: WNRO Ultimate Solution for Go x10/x20/x30 & 7000
Thu Jun 24, 2021 1:32 pm
Thanks to all for this fix, just updated my trustful Rider 2nd edition (K2 serial number), seems to have done the trick.
Been just over a week now and had no issues at all picking up my position. From a cold start it takes around 40 seconds to pin point my position.
A happy biker.
Been just over a week now and had no issues at all picking up my position. From a cold start it takes around 40 seconds to pin point my position.
A happy biker.